Right Angle Whistle Driver LB-1019
This whistle driver utilizes a machined elbow (LB2015-5) to create a short upright aperature assembly, with the resonator tube going off to the side. The deflector (LB2015-3) is applied to make the steam stream reverse direction instead of going along the short bell. This can give an enhanced effect with the steam exhaust going upwards instead of disipating downwards. The aperture support wire terminates in the bottom of the elbow.
RESONATOR NOT INCLUDED.
Description
The angled bell whistle driver assembly consists of the following:
- Aperture Assembly
- Standard full length aperture assembly
- Description of Aperture Assembly
- Short right angle bell utilizing a machined elbow to alter the direction.
- The total length of the bell is 1.6 inches length of 3/16 OD brass tubing.
Assembled
The aperture gap is defaulted to .093 inch and can be shortened by the purchaser.
Tested
The unit is tested to ensure basic function before leaving our environment.
Finish: Cleaned metal (BRASS FINISH NOTE)
Production Options:
None
Price
$170.00 USD Part Number 4000152
Page Last Edited March 17, 2008